Сhamotte heavy duty firebrick with additives is designed for the construction and internal lining of domestic heating units.
GIRtech USM – chamotte firebrick has improved thermal conductivity compared to traditional chamotte products.
Firebrick can be used in any type of domestic heating units, such as brick fireplaces, steel furnaces, heating stoves, barbecues and barbecue complexes, ceramics kilns and blacksmith forge. It can be used both for arranging the hearth of the furnace and for lining the inner surface of the furnace.
Refractory masonry must be done on a fireclay/alumina mortar, for example GIRtech CONTACT-40 or GIRtech CONTACT Drymix. Before performing work, it is necessary to moisten the contact surface with some water. It is not recommended to use cement mixes as a masonry mortar.
GIRtech USL could be cutted or processed with a special tool if necessary.
This product is not intended for use in industrial units where contact between the refractory lining and molten metals is possible.
Firebricks are packed in branded cardboard boxes of 6 pieces
hearth plates 9.0*4.5*1.25 inches
fireclay, quarz sand
Net Weight, lb
2 760 °F
Interconnected porosity, %
Apparent specific graviry, ln/in3
69 - 72
Compressive strenghth, psi
2 700 - 3 300
Thermal expansion coefficient (2 372 °F):
Thermal resistance, thermal cycles (32°F to 1700°F)
non toxic, safe for human health
From purchase to full work
Drop ship from manufacturer
Certificates for all products
We will contact you shortly
leave a request and we will call you back within an hour